FixVault
Home › Hyundai › 2017 › Azera Limited › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Body Control Module (BCM) › Body Control Module (BCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the Reinforcing panel after loosening the mounting bolt and nut.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  4. Disconnect the IPM connectors, loosening the nuts (4EA).
    Fig 1: Locating IPM Connectors With Nuts
    G12091846Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the rear connector, and then remove the IPM.
About FixVault