FixVault
Home › Hyundai › 2017 › Elantra Eco › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.4L › Heated Oxygen Sensor (HO2S) › Repair Procedures › Removal › [Bank 1/Sensor 2]

[Bank 1/Sensor 2]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the connector (A), and then remove the sensor (B).
    Fig 1: Locating Heated Oxygen Sensor Connector
    G12020603Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Locating Heated Oxygen Sensor
    G12020604Courtesy of HYUNDAI MOTOR AMERICA
About FixVault