DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Check Signal Stuck Lean	Poor connection S1 Blocking of intake system Fuel leakage in injector Improper fuel pressure
Enable Conditions	Sensor ceramic temp. is higher than 1346°F (730°C) Catalyst temp.(model) is between 986°F (530°C) and 1562° F (850°C) Exhaust mass flow is between 15kg/h and 150kg/h Required Lambda 1
Threshold Value	Secondary control variable by downstream O2 sensor is higher than 7%
Diagnostic Time	40 sec.
MIL ON Condition	2 Driving Cycles.