FixVault
Home › Hyundai › 2017 › Elantra Eco › Repair and Diagnosis › Transmission › Transmission Control Systems › Dual Clutch Transmission Control System - 1.4L › DCT Control Module (TCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the TCM connector (A).
  3. Remove the TCM from the vehicle after removing the mounting nut (B-3ea).
Fig 1: Locating TCM Connector And Mounting Nut
G12020936Courtesy of HYUNDAI MOTOR AMERICA
About FixVault