Repair Procedures: Removal

Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Remove the battery and tray.
(Refer to Engine Electrical System - "BATTERY ")
Remove the ECM.
(Refer to Engine Control System - "ECM ")
Disconnect the input shaft speed sensor connector (A).

Fig 1: Locating Input Shaft Speed Sensor Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the clutch actuator (A).
(Refer to Dual Clutch Transmission Control System - "CLUTCH ACTUATOR ASSEMBLY ")
Remove the input shaft speed sensor (A).
Tightening torque:

9.8 - 11.8 N.m (1.0 - 1.2kgf.m, 7.2 - 8.7 lb-ft)

Fig 2: Locating Input Shaft Speed Sensor
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Locating Input Shaft Speed Sensor 1
Courtesy of HYUNDAI MOTOR AMERICA