Repair Procedures: Installation

Install in the reverse order of removal.
NOTE:
- Before installing, check that the shift lever and manual control lever are placed in the "N" position.
CAUTION:
- When assembling shift cable, the projection (A) must face upwards.
  
  Fig 1: Locating Projection
  Courtesy of HYUNDAI MOTOR AMERICA
- When assembling the snap pin, be careful about the correct direction.
  - The band portion (A) must point to the front of the vehicle.
  - The band portion (A) must point outwards.
  Fig 2: Checking Band Portion
  Courtesy of HYUNDAI MOTOR AMERICA
- After installing the shift cable socket, check portion (A) to see if it projects outwards from the cap.
  
  Fig 3: Checking Shift Cable Socket Portion
  Courtesy of HYUNDAI MOTOR AMERICA