Repair Procedures: Removal

Release the residual pressure in fuel line.
(Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
Remove the rear seat cushion.
(Refer to "REAR SEAT ASSEMBLY ")
Remove the fuel pump service cover (A).

Fig 1: Locating Fuel Pump Service Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
Disconnect the fuel feed tube quick connector (C).

Fig 2: Disconnecting Fuel Pump Connector And Fuel Tank Pressure Sensor Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the rear - LH wheel & tire.
Lift the vehicle and support the fuel tank with a jack.
Disconnect the fuel filler hose (A).

Fig 3: Disconnecting Fuel Filler Hose
Courtesy of HYUNDAI MOTOR AMERICA
Remove the under cover (A) and the parking brake line (B).

Fig 4: Removing Under Cover And Parking Brake Line
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the vapor tube quick-connector (A).
Remove the fuel tank from the vehicle after removing the fuel tank band (B).

Fig 5: Disconnecting Vapor Tube Quick-Connector

Courtesy of HYUNDAI MOTOR AMERICA

NOTE:

When removing the fuel tank, the fuel tank must be tilted because of interfering with coupling.