FixVault

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Rationality check
  1. Poor connection
  2. Open or short power/ground in signal circuit
  3. S1
Enable Conditions
  • Exhaust Gas temperature is lower than 800°C.
  • Target Lambda is between 0.95 and 1.05
  • Heating ratio is between 20% and 80%
Threshold Value
  • Sensor current change calculated form sensor output voltage is higher than 190μA
Diagnostic Time
  • Continuous
Mil On Condition
  • 2 Drive Cycle