Repair Procedures: Removal

Release the residual pressure in fuel line.
(Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
Turn the ignition switch OFF, and then remove battery (-) cable.
Remove the fuel tank.
(Refer to "Fuel Tank ")
Disconnect the low pressure fuel feed tube quick-connector (A).

Fig 1: Disconnecting Low Pressure Fuel Feed Tube Quick-Connector
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the vapor hose (A) which is connected from the PCSV.

Fig 2: Disconnecting Vapor Hose From PCSV
Courtesy of HYUNDAI MOTOR AMERICA
Lift the vehicle.
Remove the heat protector installation nut (A).
Remove the fuel line fixing bracket (B) after removing the installation nut (C).

Fig 3: Removing Heat Protector Installation Nut
Courtesy of HYUNDAI MOTOR AMERICA
Open the fuel line fixing clip with the (-) driver.
Remove the fuel line (A) under the vehicle. Be careful not to damage the fuel line.

Fig 4: Removing Fuel Line Under Vehicle
Courtesy of HYUNDAI MOTOR AMERICA
Open the fuel line fixing clip with the (-) driver.
Remove the fuel line (A) under the vehicle. Be careful not to damage the fuel line.

Fig 5: Removing Fuel Line Under Vehicle (1 Of 2)

Courtesy of HYUNDAI MOTOR AMERICA

Fig 6: Removing Fuel Line Under Vehicle (2 Of 2)

Courtesy of HYUNDAI MOTOR AMERICA