Repair Procedures: Replacement

Remove the following items;
- Engine cover
  (Refer to "ENGINE COVER ")
- Air cleaner assembly and air duct
  (Refer to "AIR CLEANER ")
- Battery and battery tray
  (Refer to "BATTERY ")
Disconnect the back up lamp switch connector (A).

Fig 1: Disconnecting Back Up Lamp Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the back up lamp switch (A).

Fig 2: Removing Back Up Lamp Switch
Courtesy of HYUNDAI MOTOR AMERICA
Replace a new one and install the back up lamp switch.
Tightening torque:

39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)