FixVault

Neutralizing of SMARTRA

The EMS can be set to the status "neutral" by tester

Ignition key (regardless of key status) is inserted and after IGN ON. If receiving the correct vehicle password from GST, SMARTRA can be neutralized. The neutralization of SMARTRA is possible if DPN is same as the value inputted by GST.

In case that the SMARTRA status is neutral, the EMS keeps the lock state. And the start is not possible by "twice ignition".

In case of changing the vehicle password, new virgin transponder must be only used. And in case of virgin key, after Learning the key of vehicle password, it can be used.

If wrong vehicle specific data have been sent to SMARTRA three times continuously or intermittently, the SMARTRA will reject the request to enter neutral mode for one hour. Disconnecting the battery or other manipulation cannot reduce this time. After connecting the battery the timer starts again for one hour.

NOTE:
  • Neutralizing Setting condition:
    • In case of "SMARTRA status", "Learned"
    • Input correct Pin code by tester
  • Neutralizing meaning:
    • Vehicle password (DPN Code) & SEK Code deletion.
    • Permission of New DPN Learning.
Fig 1: EMS Neutralizing Condition Chart
G12023135Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Scantool Display - ID Register (Smartra Neutral Mode)
G12023136Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Scantool Display - Smartra Neutral Mode (With Pin Code)
G12023137Courtesy of HYUNDAI MOTOR AMERICA
Fig 4: Scantool Display - Smartra Neutral Mode Confirmation Message
G12023138Courtesy of HYUNDAI MOTOR AMERICA
Fig 5: Scantool Display - Smartra Neutral Mode (Test Completed)
G12023139Courtesy of HYUNDAI MOTOR AMERICA
Fig 6: Scantool Display - Smartra Neutral Mode (IG ON/OFF)
G12023140Courtesy of HYUNDAI MOTOR AMERICA
Fig 7: Scantool Display - Current Data
G12023141Courtesy of HYUNDAI MOTOR AMERICA