Repair Procedures: Disassembly

Loosen the bolt (A) and then disconnect the universal joint assembly from the steering column assembly.
Tightening torque:

49.0 - 58.8 N.m (5.0 - 6.0 kgf.m, 39.8 - 43.4 lb-ft)

Fig 1: Disconnecting Universal Joint Assembly From Steering Column Assembly
Courtesy of HYUNDAI MOTOR AMERICA
To reassembly, reverse the disassembly procedure.
Reassembly is the reverse of the disassembly.
NOTE:
- Do not reuse the universal joint bolt. When assembling, match the gear teeth as displayed below.
Fig 2: Locating Universal Joint
Courtesy of HYUNDAI MOTOR AMERICA