FixVault
Home › Hyundai › 2017 › Ioniq Hybrid Blue › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (HEV) › Heated Oxygen Sensor (HO2S) › Repair Procedures › Removal › [Bank 1/Sensor 2]

[Bank 1/Sensor 2]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the connector (A), and then remove the sensor (B).
Fig 1: Disconnecting Connector (Bank 1/Sensor 2)
G12111431Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Removing Sensor (Bank 1/Sensor 2)
G12111432Courtesy of HYUNDAI MOTOR AMERICA
About FixVault