FixVault
Home › Hyundai › 2017 › Ioniq Hybrid Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (HEV) › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the crankshaft position sensor connector (A).
    Fig 1: Disconnecting Crankshaft Position Sensor Connector
    G12111416Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the engine room nuder cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  4. Remove the crankshaft position sensor (B) after loosening the bolts (A).
Fig 2: Removing Crankshaft Position Sensor Bolts
G12111417Courtesy of HYUNDAI MOTOR AMERICA
About FixVault