FixVault
Home › Hyundai › 2017 › Santa Fe SE, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Intake Air Temperature Sensor (IATS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the intake air temperature sensor connector (A).
  3. Remove the installation bolts (B), and then vertically remove the sensor from the air cleaner assembly.
G12033996Courtesy of HYUNDAI MOTOR AMERICA
About FixVault