Check Spark Plug

Check spark plug and ignition coil
1. Visually/physically inspect the following items:
  - Damaged insulation, Worn electrodes, Oil or fuel fouled, Loose terminals and cracks
  - Loose contact of electrical wires
  - Poor connection
2. Measure resistance of spark plug component.
  Specification: 3 ~ 7.5k Ω
3. Measure resistance of primary and secondary ignition coil.
  Specification: Primary ignition coil: 0.62 ± 10% (20°C (68°F)), Secondary ignition coil: 7.0k ± 15% (20°C (68°F))
4. Has a problem been found?
  YES
  - Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure
  NO
  - Go to next procedure.
Check Spark Plug
1. Visually/physically inspect the following items:
  - Damaged insulation, Worn electrodes, Oil or fuel fouled, Loose terminals and cracks
  - Check for plug gap: 1.0 ~ 1.1 mm
2. Has a problem been found?
  YES
  - Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure
  NO
  - Go to next procedure.