FixVault
Home › Hyundai › 2017 › Santa Fe Sport 2.0T, AWD › Repair and Diagnosis › Electrical › Body Electrical › Body Control Module (BCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad center panel.

    (Refer to CRASH PAD CENTER PANEL Body )

  3. Disconnect the body control module connectors (A).
    Fig 1: Locating Body Control Module Connectors
    G12054490Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the body control module (A) after loosening the nuts.
Fig 2: Locating Body Control Module With Nuts
G12054491Courtesy of HYUNDAI MOTOR AMERICA
About FixVault