FixVault
Home › Hyundai › 2017 › Santa Fe Sport 2.0T, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › RCV Control Solenoid Valve › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the RCV control solenoid valve after disconnect the connector (A), bolt (B) and RCV hoses (C).
Fig 1: Disconnecting Connector, Bolt And RCV Hoses
G12055501Courtesy of HYUNDAI MOTOR AMERICA
About FixVault