FixVault
Home › Hyundai › 2017 › Sonata Base › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Program (Esp) System (Except HEV) › ESP Control Unit › Repair Procedures › Installation

Repair Procedures: Installation

  1. Installation is the reverse of removal.
  2. Tighten the HECU mounting bolts and nuts to the specified torque.
  3. After installation, bleed the brake system.

    (Refer to Brake System - "ESP System bleeding ")

  4. Connect the GDS to the data link connector located underneath the dash panel.
  5. Select and operate according to the instructions on the GDS screen.
About FixVault