FixVault
Home › Hyundai › 2017 › Sonata Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L (Except HEV) › Variable Charge Motion Actuator (VCMA) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch off and disconnect the battery (-) cable.
  2. Remove variable charge motion actuator connector (A) and three mounting bolts.
  3. Remove intake manifold vacuum pipe (B) in order to secure work space.
    Fig 1: Identifying Variable Charge Motion Actuator Connector
    G11995532Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove VCMA rod clip (A) and connection link between flap (B) using screwdriver.
    Fig 2: Identifying VCMA Rod Clip
    G11995533Courtesy of HYUNDAI MOTOR AMERICA
    NOTE: VCMA connection link can be damaged. So, make sure to remove it in a horizontal direction.
    Make sure that groove part of the connection link (C) is pointing upward when mounting VCMA.
About FixVault