Repair Procedures: Replacement

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Remove the following parts;
1. Engine cover
  (Refer to: Engine Mechanical System - "ENGINE COVER ").
2. Air cleaner assembly and air duct
  (Refer to: Engine Mechanical System - "AIR CLEANER ").
3. Battery and battery tray
  (Refer to: Engine Electrical System - "BATTERY ").
Disconnect the back up lamp switch connector (A).

Fig 1: Identifying Back Up Lamp Switch Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the back up lamp switch (A).

Fig 2: Identifying Back Up Lamp Switch
Courtesy of HYUNDAI MOTOR AMERICA
Replace a new one and install the back up lamp switch.
Tightening Torque:

39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)