Repair Procedures: Inspection

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Stop the engine and uplift the vehicle with lift.
Remove the under cover (A).

Fig 1: Identifying Under Cover
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the oil filler plug (A).

Fig 2: Loosening Oil Filler Plug
Courtesy of HYUNDAI MOTOR AMERICA
Check the oil level.
NOTE: Oil level must be up to fill the hole, if not, add oil until it runs over.

Fig 3: Checking Oil Level
Courtesy of HYUNDAI MOTOR AMERICA
Install the filler plug.
Tightening Torque:

58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)