FixVault
Home › Hyundai › 2017 › Sonata Base › Repair and Diagnosis › Transmission › Transmission Control Systems › Automatic Transaxle Control System - 2.4L (Except HEV) › Inhibitor Switch › Repair Procedures › Removal

Repair Procedures: Removal

  1. Make sure vehicle does not roll before setting shift lever to "N" position.
  2. Disconnect the negative (-) battery cable.
  3. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  4. Disconnect the inhibitor switch connector (A).
  5. Remove the shift cable mounting nut (B).
    Fig 1: Removing Inhibitor Switch Connector And Shift Cable Mounting Nut
    G11995831Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the manual control lever (B) and the washer after removing a nut (A).
    Fig 2: Removing Manual Control Lever And Washer Nut
    G11995832Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the inhibitor assembly (A) after removing the bolts (2 ea).
Fig 3: Removing Inhibitor Assembly Bolts
G11995833Courtesy of HYUNDAI MOTOR AMERICA
About FixVault