FixVault
Home › Hyundai › 2017 › Sonata Plug-In Hybrid › Repair and Diagnosis › Body & Frame › Windows › Power Windows (PHEV) › Power Window Motor › Repair Procedures › Inspection › Front Power Window Motor

Front Power Window Motor

  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim. (Refer to Body - "Front Door Trim ")
  3. Disconnect the motor connector from the motor.
    Fig 1: Motor Connector Location and Connector End Views
    G11633099Courtesy of HYUNDAI MOTOR AMERICA
  4. Connect the terminal No. 1 and No. 2 to battery voltage (12V) and check that the motor operates smoothly when connecting the terminals below.

    [Safety window motor]

    Fig 2: Safety Window Motor Connector Terminals Continuity Chart
    G11633100Courtesy of HYUNDAI MOTOR AMERICA
  5. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.

    [Standard window motor] 

    Fig 3: Standard Window Motor Connector Terminals Continuity Chart
    G11633101Courtesy of HYUNDAI MOTOR AMERICA
About FixVault