FixVault
Home › Hyundai › 2017 › Sonata Plug-In Hybrid › Repair and Diagnosis › Electrical › Starter › Button Engine Start System (PHEV) › Start/Stop Button › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative(-) battery terminal.
  2. Remove the center facia panel.

    (Refer to CENTER FACIA UPPER PANEL )

  3. Remove the start/stop button (A) from the center fascia garnish after loosening the mounting screws.
    Fig 1: Removing Start/Stop Button From Center Fascia Garnish
    G11633362Courtesy of HYUNDAI MOTOR AMERICA
About FixVault