FixVault
Home › Hyundai › 2017 › Sonata Plug-In Hybrid › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Delivery System (PHEV) › Fuel Pressure Sensor (FPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF, and then remove battery (-) cable.
  2. Remove the rear seat cushion. (Refer to Body - "Rear Seat Assembly ")
  3. Remove the fuel pump service cover (A).
    Fig 1: Fuel Pump Service Cover Location
    G11631137Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel pressure sensor connector (A).
  5. Remove the fuel pressure sensor fixing pin (B).
  6. Remove the fuel pressure sensor from the fuel pump.
    Fig 2: Locating Fuel Pressure Sensor Connector
    G11631138Courtesy of HYUNDAI MOTOR AMERICA
About FixVault