FixVault
Home › Hyundai › 2017 › Sonata Plug-In Hybrid › Repair and Diagnosis › External Pages › Different car › Section 249 (Driveshaft Assembly) › Dynamic Damper › Repair Procedures › Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front driveshaft.

    (Refer to Driveshaft Assembly - "FRONT DRIVESHAFT ")

  2. Remove the TJ joint assembly.

    (Refer to Driveshaft Assembly - "TJ JOINT ")

  3. Remove the remove the both side of band (B) of the dynamic damper (A).
    Fig 1: Removing Both Side Of Band Of Dynamic Damper
    G12055943Courtesy of HYUNDAI MOTOR AMERICA
  4. Fix the driveshaft (A) with a vice (B) as illustrated.
    Fig 2: Fixing Driveshaft With Vice
    G12055944Courtesy of HYUNDAI MOTOR AMERICA
  5. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.
  6. Separate the dynamic damper (A) from the shaft (B) carefully.
Fig 3: Separating Dynamic Damper From Shaft
G12055945Courtesy of HYUNDAI MOTOR AMERICA
About FixVault