Repair Procedures: Inspection

Turn ignition switch OFF.
Remove the Hybrid Power Control Unit (HPCU) assembly. (Refer to Hybrid Control System-"HPCU ")
Disconnect the solenoid valve connector (A).

Fig 1: 26 Brake Control Solenoid Valve (26/B_VFS) Connector Location
Courtesy of HYUNDAI MOTOR AMERICA
Measure the resistance between power terminal (5) and signal terminal (11).
Specification: 5.1 ± 0.3 Ω

Fig 2: 26 Brake Control Solenoid Valve (26/B_VFS) Connector Resistance Measurement Terminals Connector End View
Courtesy of HYUNDAI MOTOR AMERICA