Repair Procedures: Inspection

Turn ignition switch OFF.
Remove the Hybrid Power Control Unit (HPCU) assembly. (Refer to Hybrid Control System-"HPCU ")
Disconnect the solenoid valve connector (A).

Fig 1: Locating Solenoid Valve Connector
Courtesy of HYUNDAI MOTOR AMERICA
Measure the resistance between power terminal (10) and signal terminal (2).
Specification: 5.1 ± 0.3 Ω

Fig 2: Solenoid Valve Connector Resistance Measurement Terminals in Connector End View
Courtesy of HYUNDAI MOTOR AMERICA