FixVault
Home › Hyundai › 2017 › Tucson SE, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Heated Oxygen Sensor (HO2S) › Repair Procedures › Removal › [Bank 1/Sensor 2]

[Bank 1/Sensor 2]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the connector (A), and then remove the sensor (B).
Fig 1: Locating Heated Oxygen Sensor Connector (Bank 1/Sensor 2)
G12044331Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Locating Heated Oxygen Sensor (Bank 1/Sensor 2)
G12044332Courtesy of HYUNDAI MOTOR AMERICA
About FixVault