Repair Procedures: Removal

Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).

Fig 1: Locating Filler-Neck Assembly Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
Remove the rear-LH wheel, tire, and the inner wheel house.
Disconnect the fuel filter hose (A) and the ventilation hose (B).

Fig 2: Locating Fuel Filter Hose And Ventilation Hose
Courtesy of HYUNDAI MOTOR AMERICA
Remove the filler-neck assembly from the vehicle after removing the bracket mounting nuts (A).

Fig 3: Locating Bracket Mounting Nuts

Courtesy of HYUNDAI MOTOR AMERICA