FixVault
Home › Hyundai › 2017 › Tucson Value, FWD › Repair and Diagnosis (Single Page) › Brakes › Traction Control › Electronic Stability Control (ESC) System › ESC Control Module › Repair Procedures › Installation

Repair Procedures: Installation

  1. Installation is the reverse of removal.
  2. Tighten the HECU mounting bolts and nuts to the specified torque.
  3. After installation, bleed the brake system.

    (Refer to Brake system - "BRAKE SYSTEM BLEEDING ")

  4. Conduct the Variant coding.
  5. Conduct the Auto Detected Sensor Calibration.
  6. Conduct the Longitudinal G Sensor Calibration.
About FixVault