FixVault
Home › Hyundai › 2017 › Tucson Value, FWD › Repair and Diagnosis › Electrical › Body Electrical › Body Control Module (BCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad under cover.

    (Refer to Body - "CRASH PAD UNDER COVER ")

  3. Disconnect the body control module connectors (A).
    Fig 1: Disconnecting Body Control Module Connectors
    G12042755Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the body control module (A) after loosening the mounting nuts and screw.
Fig 2: Removing Body Control Module Mounting Nuts And Screw
G12042756Courtesy of HYUNDAI MOTOR AMERICA
About FixVault