Repair Procedures: Removal

Disconnect the battery negative terminal.
Loosen the mounting bolts (A) and then, turn the adjusting bolt (B) clockwise to loosen tension.

Fig 1: Locating Adjusting Bolt And Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the drive belt (A).

Fig 2: Drive Belt Routing
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the air compressor connector (A) and the alternator connector (B), and remove the cable from alternator "B" terminal (C).

Fig 3: Locating Air Compressor Connector, Alternator Connector And Cable From Alternator B Terminal
Courtesy of HYUNDAI MOTOR AMERICA
Remove the alternator (A).

Fig 4: Locating Alternator With Mounting Bolts

Courtesy of HYUNDAI MOTOR AMERICA