FixVault
Home › Hyundai › 2017 › Tucson Value, FWD › Repair and Diagnosis › Electrical › Charging Systems › Charging System - 1.6L › Battery Sensor › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the battery negative (-) cable.
  2. Remove the battery.

    (Refer to Charging System - "BATTERY ")

  3. Disconnect the battery sensor connector (A).
    Fig 1: Locating Battery Sensor Connector
    G12039236Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the battery negative (-) cable after removing the bolt (A).
Fig 2: Locating Battery Negative (-) Cable Bolt
G12039237Courtesy of HYUNDAI MOTOR AMERICA
About FixVault