Repair Procedures: Removal

1. Remove the shift lever knob & boots (A).
   Fig 1: Locating Shift Lever Knob & Boots

   Courtesy of HYUNDAI MOTOR AMERICA
2. Remove the floor console assembly.

   (Refer to Body - "FLOOR CONSOLE ")

3. Remove the air duct (A).
   Fig 2: Locating Air Duct

   Courtesy of HYUNDAI MOTOR AMERICA
4. Disconnect the main connector (A).
   Fig 3: Locating Main Connector

   Courtesy of HYUNDAI MOTOR AMERICA
5. Disconnect the wiring fixed clip (A).
   Fig 4: Locating Wiring Fixed Clip

   Courtesy of HYUNDAI MOTOR AMERICA
6. Disconnect the shift cable.
   1. Disconnect the cable holder (A) from the shift lever, after removing the snap pin (C).
   2. Disconnect the cable bracket (B) from the shift lever after pushing the lock.
   Fig 5: Locating Cable Bracket, Cable Holder And Snap Pin

   Courtesy of HYUNDAI MOTOR AMERICA
7. Remove the shift lever assembly (A) after removing the bolts.

Tightening torque: 

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Fig 6: Locating Shift Lever Assembly And Bolts

Courtesy of HYUNDAI MOTOR AMERICA