FixVault
Home › Hyundai › 2017 › Veloster Base, Automatic DCT Trans › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › Start/Stop Button › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the center fascia panel assembly (A).
    Fig 1: Removing Center Fascia Panel Assembly
    G12128789Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the connector after loosening 2 screws, and then remove the start/stop button (A).
    Fig 2: Removing Start/Stop Button
    G12128790Courtesy of HYUNDAI MOTOR AMERICA
About FixVault