FixVault
Home › Hyundai › 2017 › Veloster Base, Automatic DCT Trans › Repair and Diagnosis › Transmission › Transmission Control Systems › Dual Clutch Transmission Control System - 1.6L GDI › Input Speed Sensor 2 › Repair Procedures › Removal

Repair Procedures: Removal

  1. Remove the under cover.
  2. Disconnect the input shaft speed sensor connector (A).
    Fig 1: Locating Input Shaft Speed Sensor Connector
    G12129624Courtesy of HYUNDAI MOTOR AMERICA
  3. Loosen the mounting bolt and then remove the input shaft speed sensor (B).
    Fig 2: Locating Input Shaft Speed Sensor
    G12129625Courtesy of HYUNDAI MOTOR AMERICA
About FixVault