FixVault
Home › Hyundai › 2017 › Veloster Base, Standard Trans › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Body Control Module (BCM) › Intelligent Integrated Platform Module (IPM) › Repair Procedures › Removal › Notes

Repair Procedures: Removal: Notes

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel. (Refer to "CRASH PAD ")
  3. Disconnect the IPM connectors, loosening the nut (2EA) and the bolt (1EA), then remove the IPM.
    Fig 1: Disconnecting IPM Connectors Nut And Bolt
    G12126322Courtesy of HYUNDAI MOTOR AMERICA
  4. The installation is the reverse order of removal.
About FixVault