Crash Pad Lower Panel Replacement

CAUTION:

A plastic trim tool is recommended, but if prying with a screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.

Remove the following items.
- Front door scuff trim
  (Refer to "INTERIOR TRIM ")
- Cowl side trim
  (Refer to "INTERIOR TRIM ")
Using a screwdriver or remover, remove the crash pad side cover (A).

Fig 1: Removing Crash Pad Side Cover
Courtesy of HYUNDAI MOTOR AMERICA
After loosening the mounting screws, then remove the crash pad lower panel (A).

Fig 2: Removing Crash Pad Lower Panel
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the crash pad switch connectors (A) and diagnosis connector (B).

Fig 3: Disconnecting Crash Pad Switch Connectors & Diagnosis Connector
Courtesy of HYUNDAI MOTOR AMERICA
Installation is the reverse of removal.

NOTE: