Repair Procedures: Replacement: Removal

CAUTION:

Remove the following items.
- Front pillar trim
  (Refer to "INTERIOR TRIM ")
- Inside rear view mirror
  (Refer to "MIRROR ")
- Wiper arm
  (Refer to "COWL TOP COVER ")
- Cowl top cover
  (Refer to "COWL TOP COVER ")
To remove the A pillar garnish (A), loosen the mounting screw after removing the cap (B).
Tightening Torque :

0.5 ~ 1.0N.m (0.05 ~ 0.1kgf.m, 0.4 ~ 0.7 lb-ft)

Fig 1: Removing A-Pillar Garnish Mounting Screw
Courtesy of HYUNDAI MOTOR AMERICA
Using a screwdriver or remover, remove the windshield glass upper molding (A).

Fig 2: Removing Windshield Glass Upper Molding
Courtesy of HYUNDAI MOTOR AMERICA
Cut out the sealant using the sealant cutting tool (09861-31100).

Fig 3: Cutting Out Sealant Using Sealant Cutting Tool (09861-31100)
Courtesy of HYUNDAI MOTOR AMERICA
Remove the windshield glass (B) carefully using the glass holder (A).

Fig 4: Removing Windshield Glass Using Glass Holder
Courtesy of HYUNDAI MOTOR AMERICA