FixVault
Home › Hyundai › 2017 › Veloster Base, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L GDI › Purge Control Solenoid Valve (PCSV) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the purge control solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the purge control solenoid valve.
  4. Remove the valve after removing the bolt (C).
    Fig 1: Locating Purge Control Solenoid Valve Connector, Vapor Hoses, PCSV And Bolt
    G12129460Courtesy of HYUNDAI MOTOR AMERICA
About FixVault