Repair Procedures: Removal

Disconnect the battery negative cable and wait for at least three minutes before beginning work.
Turn the steering wheel so that the front wheels can face straight ahead.
Remove the driver airbag module mounting bolts (2EA).

Fig 1: Removing Driver Airbag Module Mounting Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Remove the wiring fixing clip (C), and then release the connector locking pin to disconnect the driver airbag module connector (B).

Fig 2: Disconnecting Driver Airbag Module Connector
Courtesy of HYUNDAI MOTOR AMERICA

CAUTION: The removed airbag module should be stored in a clean dry place with the pad cover facing up.
Remove the steering wheel and steering wheel column shroud. (Refer to MDPS ASSEMBLY )

Fig 3: Removing Steering Wheel And Steering Wheel Column Shroud
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the clock spring connector, then remove the clock spring.

Fig 4: Disconnecting Clock Spring Connector

Courtesy of HYUNDAI MOTOR AMERICA