FixVault
Home › Hyundai › 2017 › Veloster Base, Standard Trans › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Restraint System Control Module (SRSCM) And Sensors › SRS Control Module (SRSCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Remove the floor console.

    (Refer to "CONSOLE ")

  4. Pull up the lock, of the SRSCM connector, the disconnect the connector (A and B).
    Fig 1: Locating SRSCM Connectors
    G12125480Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the SRSCM mounting bolt and nuts from the SRSCM, then remove the SRSCM.
About FixVault