FixVault
Home › Hyundai › 2017 › Veloster Turbo R-Spec › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L T-GDI › ETC (Electronic Throttle Control) System › Repair Procedures › Inspection › Removal

Repair Procedures: Inspection: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose.

    (Refer to "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
    Fig 1: Locating ETC Module Connector
    G12124769Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the installation bolts, and then remove the ETC module (A) from the engine.
    Fig 2: Locating ETC Module With Installation Bolts
    G12124770Courtesy of HYUNDAI MOTOR AMERICA
About FixVault