FixVault
Home › Hyundai › 2017 › Veloster Turbo, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L T-GDI › Heated Oxygen Sensor (HO2S) › Repair Procedures › Removal › Bank 1/Sensor 2]

Bank 1/Sensor 2]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the console side cover (A).
    Fig 1: Locating Console Side Cover
    G12124818Courtesy of HYUNDAI MOTOR AMERICA
  3. Disconnect the connector (A).
    Fig 2: Locating Heated Oxygen Sensor Connector
    G12124819Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove heated oxygen sensor (A).
    Fig 3: Locating Heated Oxygen Sensor
    G12124820Courtesy of HYUNDAI MOTOR AMERICA
About FixVault