FixVault
Home › Hyundai › 2017 › Veloster Turbo, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L T-GDI › Waste Gate Solenoid Valve (WGV) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the waste gate solenoid valve connector (A).
  3. Disconnect the vapor hoses (B) from the waste gate solenoid valve.
  4. Remove the valve after removing the bolt (C).
  5. Remove the waste gate solenoid valve (D).
    Fig 1: Locating Waste Gate Solenoid Valve Connector, Vapor Hoses, Waste Gate Solenoid Valve & Bolt
    G12124857Courtesy of HYUNDAI MOTOR AMERICA
About FixVault