FixVault
Home › Hyundai › 2018 › Accent Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Camshaft Position Sensor (CMPS) › Repair Procedures › Removal › [Bank 1 / Exhaust]

[Bank 1 / Exhaust]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the hanger and the protector.
  4. Remove the installation bolt (B), and then remove the sensor.
G12598517Courtesy of HYUNDAI MOTOR AMERICA
About FixVault