Verification of Vehicle Repair

After repairing the problem occurred using this diagnosis guide, a procedure to check if this failure has been solved completely is necessary.

1. Connect GDS and carry out the self-diagnosis to check "Diagnostic Trouble Codes (DTCs)".
2. Erase the stored DTC using GDS.
3. Drive the vehicle according to the detecting condition among the DTC judgment conditions.
4. Carry out the self-diagnosis using GDS to see if DTC has occurred.
5. Has DTC occurred?

YES 

• Go to the applicable troubleshooting procedure.

NO 

• The failure repair procedure is complete so that the system operates normally.