FixVault
Home › Hyundai › 2018 › Elantra Eco › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.4L › Camshaft Position Sensor (CMPS) › Repair Procedures › Removal › [Bank 1/Intake]

[Bank 1/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air cleaner.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Remove the wiring bracket (A) after releasing the fixing hooks (B).
    Fig 1: Locating Wiring Bracket And Fixing Hooks
    G12020593Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the camshaft position sensor connector (A).
  5. Remove the installation bolt (B), and then remove the sensor.
Fig 2: Locating Camshaft Position Sensor Connector And Installation Bolt
G12020594Courtesy of HYUNDAI MOTOR AMERICA
About FixVault